1 Stop Shopping at TravLynPeddlers for Wire Wrap Tools!
Almost FREE ($ 5.00) SHIPPING ON ORDERS
TO LOWER 48 STATES SHIPPED VIA USPS.
(SOME LIMITATIONS MAY APPLY).
Helpful Wire Wrap Information:
- Solderless wire wrapping is a fast, reliable and inexpensive method of making connections to terminals in high-density electronic equipment.
- "Modified" wrapping bit is designed to wrap 1-1/2 turns of insulation around the terminal post.
- This is designed to provide extra strength to the connection and reduce wire breakage from vibration and pulling on wires.
- Each bit undergoes a series of tests for quality assurance.
- Groups of wire are wrapped on various types of test terminals and then subjected to strip tests to determine adequate tightness.
- Unwrap tests ensure against overtight wraps.
- These wire wrap bits are compatible with any make or model wire wrapping tool.
 1aCabletool's WWK125B Wire Wrap Kit features OK Industries' cordless wire wrap tool w/ 2 NiCH batteries
and charger, cable splicer's kit, Phillips screwdriver (#0), 6" adjustable wrench with cushion grip, 3/32 x 2" slot screwdriver, 20-26 AWG
unwrapping tool, 22, 22-24, 24 and 26 AWG standard wrap bits, Wire Wrap sleeves for bits, 22/26 AWG cutter/stripper, sharp wire spudger,
mini Maglite, 2-AA batteries, cable butt/strip tool.
WWK125B Wire Wrap Tool Kit w/ PTX-1BF Battery Wire Wrap Gun
Price: $ 845.00 Each Kit.
 PTX-Kit 1 battery-powered tool kit includes a PTX battery-powered wire wrap/unwrap tool, PTX-BC1 chargerand two PTX-B 3.6-V NiMH batteries. PTX wire wrapping tool features an ergonomic design with lightweight construction, reversible motor, dual-finger short-throw trigger, LED indicator for low voltage. Rugged housing encases a high-torque planetary gear drive that can wrap or unwrap 18 to 30 AWG (1.0 to .25 mm) wire, and is compatible with the full range of industry-standard bits and sleeves.
122T573 PTX-KIT-1 Cordless Wire Wrap & Unwrap Tool Kit
Price: $ 309.00 Each Kit.
 3.6-V environmentally friendly NiMH battery for the OK Industries PTX wire wrap/unwrap tool. Model PTX-B
long-lasting battery will provide 500-700 wrapping or unwrapping operations when used with the PTX wrapping tool before needing to be replaced.
122T564 PTX-B Rechargeable Battery Only for PTX Wrap & Unwrap Tool
Price: $ 45.00 Each.
 115-V Model PTX-BC1 battery charger for use with OK Industries PTX wire wrap/unwrap tools' 3.6-V NiMH batteries. It charges one battery at a time while plugged into an outlet.
122T571 PTX-BC1 Charger Only for PTX Battery, 115 Vac.
Price $ 77.50 Each.
 1aCableTool's WWK180E Electric Wire Wrap Kit features OK Industries' electric wire wrap tool, cable splicer's kit, Phillips screwdriver (#0), 6" adjustable wrench with cushion grip, 3/32 x 2" slot screwdriver, 20-26 AWG unwrapping tool, 22, 22-24, 24 and 26 AWG standard wrap bits, Wire Wrap sleeves for bits, 22/26 AWG cutter/stripper, sharp wire spudger, mini Maglite, 2-AA batteries, cable butt/strip tool.
WWK180E Wire Wrap Kit w/ PTX 1BF Electric Wire Wrap Gun
Price: $ 715.00 Each Kit.
 1aCableTool's WWK100M Manual Wire Wrap Kit features OK Industries' insulated manual wire wrapping tool,
cable splicer's kit, Phillips screwdriver (#0), 6" adjustable wrench with cushion grip, 3/32 x 2" slot screwdriver, 20-26 AWG unwrapping tool, 22,
22-24, 24 and 26 AWG standard wrap bits, Wire Wrap sleeves for bits, 22/26 AWG cutter/stripper, sharp wire spudger, mini Maglite, 2x-AA batteries, cable butt/strip tool.
WWK100M Manual Wire Wrap Kit w/ G100 Manual Wire Wrap Gun
Price: $ 655.00 Each Kit.
 Vertical Cordura Tool Case is composed of a heavy-duty Cordura and specially designed to stand upright so
individual tool slots and pouches are easy to reach. Tool Case features web-type handles with a Velcro closure for comfortable, padded carrying.
082T511 is used with the WWK100M Manual Wire Wrap Kit. Case only measures 17.5" x 11.25" x 6.5" O.D. and is BLACK in color.
082T511 Soft-Sided, Vertical BLACK Wire Wrap Tool Case 17 x 11 x 6.5"
Price: $ 94.00 Each.
.
 OK Industries WWK-CO is a Seven-tool Insulated Wire Wrap Kit specifically designed for technicians working in theCentral Office. Includes 1000-V Insulated Wire Wrapping Tools for 22-24 AWG wire sizes, Telecom Long Nose Pliers, Probe Pick Spudger, Sleeved Unwrapping Tool and Wire Loop Puller in a durable Cordura Tool Pouch.
WWKCO Central Office Wire Wrapping Kit
Price: $ 375.00 Each Kit.
 OK Industries' WWK-1INS Insulated Telecom Wire Wrap Kit is designed for technicians working at a main distributing frame or performing field service. Insulated Kit contains a G100/R3278INS insulated manual Wire Wrapping Tool, a 20-26 AWG hand unwrap tool, 22-24 AWG wire cut-and-strip tool plus 22-24 AWG insulated bit and sleeve in a Cordura tool pouch.
WWK1INS Insulated Telecom Wire Wrapping Kit
Price: $ 350.00 Each Kit
 Ok Industries' WWK-1 Telecom Wire Wrapping Tool Kit is designed for technicians working at a main distributing frame or performing field service. Kit includes G200/R3278 manual wire wrap gun with Lexan housing, ST-100 22-24 AWG wire cut-and-strip tool, HW-UW-224 hand wrap/ unwrap tool (22-24 AWG), KB224 22-24 AWG bit, P2224 22-24 AWG sleeve, and durable H-1000 Cordura Tool Pouch.
WWK-1 Telecom Wire Wrapping Kit
Price: $ 339.00 Each Kit.
 OK Industries' H-1000 Cordura Tool Pouch is made of high-performance, super-durable fabric for the professional tradesman. Pouch is adaptable to many tool configurations including manual wire wrapping tools and the PTX battery and electric wire wrapping tools.
122T710 H-1000 BLACK Cordura Tool Pouch
Price: $ 46.00 Each.
 Jonard 22-24-26 AWG Stripper and Cutter for Wire Wrap Wire is an easy-to-operate combination tool.
Just place the wire in the stripping slot with the ends between the cutting blades. Then squeeze the tool and pull. Wire is cut and stripped
to the proper wire-wrapping length. Not applicable for Mylene or Teflon insulation. This tool comes with two interchangeable, easily replaceable
stripping blades for 22/24- and 24/26-gauge wire. Blades are also sold separately.
864T447 JIC-4473 Jonard 22-24-26 AWG Stripper and Cutter for Wire Wrap Wire
Price: $ 53.00 Each.
 22/24 AWG Replacement Wire Wrap Strip Blade only is offered as a separate option with the
Jonard Wire Wrap Stripper/Cutter.
864T451 SB-2224 22/24 AWG Replacement Wire Wrap Strip Blade Only
Price: $ 13.25 Each.
 24/26 AWG Replacement Wire Wrap Strip Blade only is offered as a separate option with
the Jonard Wire Wrap Stripper/Cutter.
864T453 SB-2426 24/26 AWG Replacement Wire Wrap Strip Blade Only
Price: $ 13.25 Each.
 Fluke Networks 22/24 AWG Bradley-Type wire stripper with cutter is a non-adjustable wire stripper carried by telephone installers to quickly strip 22- and 24-AWG wire for wire wrapping. The J-hook end fits around fingers to allow placing wire(s) in proper strip slot and with a quick pull and squeeze of the cutter to strip and cut wires to length for wire wrapping. Between strip cycles, the tool can hang by the J-Hook.
350T777 44210013 Fluke Networks 22-24 AWG Bradley-Type Wire Stripper with Cutter
Price: $ 48.00 Each.
 Fluke Networks 24/26 AWG Bradley-Type Wire Stripper w/ Cutter is a non-adjustable wire stripper carried by telephone installers to quickly strip 24- and 26-AWG wire for wire wrapping. The J-hook end fits around fingers to allow placing wire(s) in proper strip slot and with a quick pull and squeeze of the cutter to strip and cut wires to length for wire wrapping. Between strip cycles, the tool can hang by the J-Hook.
350T779 44210015 Fluke Networks 24/26 AWG Bradley-Type Wire Stripper w/ Cutter
Price: $ 49.50 Each.
 Ok Industries' 22-24 AWG wire, cut and strip, tool is a revolutionary method of easy, clean wire stripping for wire-wrapping applications. Easy-to-use wire cut-and-strip tool is biomechanically designed for maximum efficiency. Place up to four wires in
stripping slot with ends extending beyond cutter blades, press tool and pull. Wire is cut and stripped to the proper wire-wrapping length.
Hardened steel blades and sturdy tool construction ensure long life. Easily adjust strip length for your application.
122T685 ST-100 Wire Cut and Strip Tool, 22 & 24 AWG
Price: $ 49.50 Each.
 OK Industries ST-100-2426 24-26 AWG Wire Cut and Strip Tool is a revolutionary method of easy, clean wire
stripping for wire-wrapping applications. Easy-to-use wire cut-and-strip tool is biomechanically designed for maximum efficiency. Place up to four
wires in stripping slot with ends extending beyond cutter blades, press tool and pull. Wire is cut and stripped to the proper wire-wrapping length.
Hardened steel blades and sturdy tool construction ensure long life. Easily adjust strip length for your application.
122T693 ST-100-2426 OK Industries Wire Cut and Strip Tool, 24 & 26 AWG
Price: $ 49.50 Each.
 OK Industries 28-30 AWG Wire Cut and Strip Tool is a revolutionary method of easy, clean wire stripping for
wire-wrapping applications. Easy-to-use wire cut-and-strip tool is biomechanically designed for maximum efficiency. Place up to four wires in
stripping slot with ends extending beyond cutter blades, press tool and pull. Wire is cut and stripped to the proper wire-wrapping length.
Hardened steel blades and sturdy tool construction ensure long life. Easily adjust strip length for your application.
122T699 ST-100-2830 OK Industries Wire Cut and Strip Tool, 28 & 30 AWG
Price: $ 49.50 Each.
PTX-Kit 1 battery-powered tool kit includes a PTX battery-powered wire wrap/unwrap tool, PTX-BC1 charger and two PTX-B 3.6-V NiMH batteries. PTX wire wrapping tool features an ergonomic design with lightweight construction, reversible motor, dual-finger short-throw trigger, LED indicator for low voltage. Rugged housing encases a high-torque planetary gear drive that can wrap or unwrap 18 to 30 AWG (1.0 to .25 mm) wire, and is compatible with the full range of industry-
standard bits and sleeves.
122T573 PTX-KIT-1 Cordless Wire Wrap & Unwrap Tool Kit
Price: $ 309.00 Each Kit.
3.6-V environmentally friendly NiMH battery for the OK Industries PTX wire wrap/unwrap tool. Model PTX-B
long-lasting battery will provide 500-700 wrapping or unwrapping operations when used with the PTX wrapping tool before needing to be replaced.
122T564 PTX-B Rechargeable Battery Only for PTX Wrap & Unwrap Tool
Price: $ 45.00 Each.
115-V Model PTX-BC1 battery charger for use with OK Industries PTX wire wrap/unwrap tools' 3.6-V NiMH batteries. It charges one battery at a time while plugged into an outlet.
122T571 PTX-BC1 Charger Only for PTX Battery, 115 Vac.
Price $ 77.50 Each.
 Jonard's TK-WW5 is a complete 5 piece field service telecom installation wire wrapping kit-also used by technicians working at a main distributing frame. Kit includes WG-350INS Manual Wrap Gun providing up to 10 revolutions per squeeze for 18-32 AWG wire sizes, JIC-4473 Wire Stripper and Cutter with interchangeable blades, 3" Wire wrapping Bit and Sleeve, Hand Wrap and Unwrap Tool all in a handy Leather Holster.
054T711TK-WW5 Jonard Manual Wire Wrap Kit
Price: $ 296.00 Each Kit.
 OK Industries Model PTX-1BF wire wrap/unwrap tool features the backforce option to help prevent overwrapping. The 115-volt electric wire wrap tool has a spring mounted internally in the collet/shaft assembly to absorb pressure that an untrained operator may apply while wrapping. Rugged housing encases a high-torque planetary gear drive that can wrap or unwrap 18 to 30 AWG (1.0 to .25 mm) wire, and is compatible with the full range of industry-standard bits and sleeves. Comes with 20 ft. cord.
122T560 PTX-1BF Electric Wire Wrap & Unwrap Tool, 115 Vac w/ Backforce
Price: $ 185.00 Each.
 OK Industries 115-volt PTX-1 Electric Wrap/Unwrap Tool features lightweight construction, reversible motor, dual-finger short-throw trigger and a long handle to mitigate pressure on the palm. Rugged housing encasesa high-torque planetary gear drive that can wrap or unwrap 18 to 30 AWG(1.0 to .25-mm) wire, and is compatible with the full range of industrystandard bits and sleeves. It has a 20 foot electrical cord.
122T555 PTX-1 Electric Wire Wrap & Unwrap Tool, 115 Vac
Price: $ 175.00 Each.
PTX-Kit 1 battery-powered tool kit includes a PTX battery-powered wire wrap/unwrap tool, PTX-BC1 charger and two PTX-B 3.6-V NiMH batteries. PTX wire wrapping tool features an ergonomic design with lightweight construction, reversible motor, dual-finger short-throw trigger, LED indicator for low voltage. Rugged housing encases a high-torque planetary gear drive that can wrap or unwrap 18 to 30 AWG 1.0 to .25 mm) wire, and is compatible with the full range of industry-standard bits and sleeves.
122T573 PTX-KIT-1 Cordless Wire Wrap & Unwrap Tool Kit
Price: $ 309.00 Each Kit.
3.6-V environmentally friendly NiMH battery for the OK Industries PTX wire wrap/unwrap tool. Model PTX-B
long-lasting battery will provide 500-700 wrapping or unwrapping operations when used with the PTX wrapping tool before needing to be replaced.
122T564 PTX-B Rechargeable Battery Only for PTX Wrap & Unwrap Tool
Price: $ 45.00 Each.
115-V Model PTX-BC1 battery charger for use with OK Industries PTX wire wrap/unwrap tools' 3.6-V NiMH batteries. It charges one battery at a time while plugged into an outlet.
122T571 PTX-BC1 Charger Only for PTX Battery, 115 Vac.
Price: $ 77.50 Each.
Helpful Wire Wrap Information:
When used in conjunction with an insulated wiring wrapping tool, the bit and sleeve help protect
the worker while minimizing the possibility of pin-to-pin shorting. They're coated with a non-conductive material that provides 1000-volt dielectric strength. Make connections to terminals in high-density electronic equipment quickly, reliably and inexpensively.
 Insulated Manual Wire Wrapping Tool with a bracket-mounted LED Flashlight to add the convenience of task lighting when working in poorly lit areas. Jonard's ergonomic, insulated, manual quick-wrap gun is made of durable metal. The WG-350INS provides up to 10 revolutions per trigger squeeze and accommodates 18 to 32-AWG wire sizes. Flashlight is positioned to illuminate either 3" or 5" bit and sleeve. Uses a standard AAA battery, one included.
122T120 G100/R3278FL Manual Wire Wrap Gun, Insulated, w/ LED Flashlight
Price: $ 145.00 Each.
 OK Industries' G100/R3278INS Insulated Manual Wire Wrapping Tool combines the rugged durability of 1000-volt dielectric strength with the safety of an insulated housing. Use it in conjunction with insulated wire wrapping sleeves. The housing and internal drive mechanism are constructed from metal components which provide superior toughness and impact resistance. When used in conjunction with insulated sleeves helps protect the worker while minimizing the possibility of pin-to-pin shorting.
122T645 G100R3278INS Manual Wire Wrapping Tool, Insulated
Price: $ 139.00 Each.
 Jonard's ergonomic, insulated, manual quick-wrap gun is made of durable metal. The WG-350INS provides up to 10
revolutions per trigger squeeze and accommodates all industry standard bits and sleeves, 22 to 32-AWG wire sizes.
054T453 WG-350INS Insulated Manual Wire Wrapping Gun
Price: $ 122.50 Each.
 OK Industries' heavy-duty, dependable and ruggedly constructed aluminum wire wrapping tool provides
10 revolutions per squeeze and accomodates wire sizes from 18AWG (1.00mm) thru 32 AWG (0.20mm) using a full range of wire wrapping bits
and sleeves. Compatible with all major brands of wire wrap bits and sleeves.
122T110 G100/R3278 Manual Wire Wrap Gun, Aluminum
Price: $ 120.00 Each.
 OK Industries' light weight, durable and economical Lexan wire wrapping tool provides 10 revolutions per
squeeze and accomodates wire sizes from 18AWG (1.00mm) thru 32 AWG (0.20mm) using a full range of wire wrapping bits and sleeves.
Compatible with all major brands of wire wrap bits and sleeves.
122T115 G200/R3278 Manual Wire Wrap Gun, Lexan
Price: $ 94.50 Each.
OK Industries' H-1000 Cordura Tool Pouch is made of high-performance, super-durable fabric for the professional tradesman. Pouch is adaptable to many tool configurations including manual wire wrapping tools and the PTX battery and electric wire wrapping tools.
122T710 H-1000 BLACK Cordura Tool Pouch
Price: $ 46.00 Each.
Helpful Wire Wrap Information:
How to Make Wire Wrapped Connections
-
Insert the pre-stripped wire into the wire slot of the wrapping bit.
-
Anchor the wire in the notch of the wrapping sleeve.
-
Insert the terminal into the center hole of the wrapping bit.
-
Activate the wire wrapping tool.
-
This rotates the wrapping bit and wraps the wire around the terminal.
 OK Industries' DFB224 innovative bit and sleeve set combines wrap and unwrap functions with 22-24 AWG wire. The bit is precision machined for high-quality clockwise wrapping and includes the removal mechanism for counterclockwise unwrapping. You also get a retractable sleeve with an insulated coating that provides 1000-V dielectric strength to prevent pin-to-pin shorting.
122T060 DFB224 Dual Function Wire Wrap Unwrap Bit & Sleeve Set 22-24 AWG
Price: $ 114.00 Each.
 OK Industries' DFB2426 innovative Bit and Sleeve Set combines wrap and unwrap functions with 24-26 AWG wire. The bit is precision machined for high-quality clockwise wrapping and includes the removal mechanism for counterclockwise unwrapping. You also get a retractable sleeve with an insulated coating that provides 1000-V dielectric strength to prevent pin-to-pin shorting.
054T177 DFB2426 Dual Function Wire Wrap-Unwrap Bit and Sleeve Set, 24-26 AWG
Price: $ 114.00 Each.
Helpful Wire Wrap Information:
When used in conjunction with an insulated wiring wrapping tool, the bit and sleeve help protect the worker while minimizing the possibility of pin-to-pin shorting. They're coated with a non-conductive material that provides 1000-volt dielectric strength. Make connections to terminals in high-density electronic equipment quickly, reliably and inexpensively.
 Wire Wrap Bit & Sleeve Set 22-AWG, 3", Standard Wrap is a convenient pre-assembled wire wrapping bit
and sleeve set for 22 AWG and gives a regular wrap. Terminal hole depth is .750" and terminal hole diameter is .075". Quick identification is provided by color-coded heat-shrink insulation applied to the sleeves. KT-22B is coded Blue and intended for use with large (0.045") diameter terminal pins.
126T022 KT-22B Wire Wrap BLUE Insulated Bit and Sleeve Set, 22-AWG, 3" Std Wrap
Price: $ 53.50 Each.
 Wire Wrap Bit & Sleeve Set 22 & 24-AWG, 3", Standard Wrap is a convenient pre-assembled wire wrapping bit
and sleeve set for 22/24 AWG and gives a regular wrap. Terminal hole depth is .807" and terminal hole diameter is .075". Quick identification is
provided by color-coded heat-shrink insulation applied to the sleeves. KT-224B is coded BLUE and intended for use with large (0.045") diameter
terminal pins.
126T024 KT-224B Wire Wrap BLUE Insulated Bit and Sleeve Set, 22-24 AWG, 3" Std Wrap
Price: $ 53.50 Each.
 Wire Wrap Bit & Sleeve Set 24-AWG, 3", Standard Wrap is a convenient pre-assembled wire wrapping bit and sleeve set for 24 AWG and gives a regular wrap. Terminal hole depth is .750" and terminal hole diameter is .075". Quick identification is provided by color-coded heat-shrink insulation applied to the sleeves. KT-24Y is coded Yellow and intended for use with large (0.045") diameter terminal pins.
126T025 KT-24Y Wire Wrap YELLOW Insulated Bit and Sleeve, 24 AWG, 3" Std Wrap
Price: $ 53.50 Each.
 Wire Wrap Bit & Sleeve Set 26-AWG, 3", Standard Wrap is a convenient pre-assembled wire wrapping bit and sleeve set for 26 AWG and gives a regular wrap. Terminal hole depth is .1" and terminal hole diameter is .075". Quick identification is provided by color-coded heat-shrink insulation applied to the sleeves. KT-26G is coded GREEN and intended for use with large (0.045") diameter terminal pins.
126T026 KT-26G Wire Wrap GREEN Insulated Bit and Sleeve, 26 AWG, 3" Std Wrap, Large 0.045" Sq. Pins
Price: $ 53.50 Each.
 Wire Wrap Bit & Sleeve Set 26-AWG, 3", Modified Wrap is a convenient pre-assembled wire wrapping bit and sleeve set for 26 AWG and gives a modified wrap. Terminal hole depth is .750" and terminal hole diameter is .045". Quick identification is provided by color-codedheat-shrink insulation applied to the sleeves. KT-26R is coded Red and intended for use with small (0.025") diameter terminal pins.
126T027 KT-26R Wire Wrap RED Insulated Bit and Sleeve, 26 AWG, 3" Modified Wrap, 0.025" Sq. Small Pins
Price: $53.50 Each Set.
 OK Industries' KB18 Standard Wire Wrap Bit works with 18-AWG wires. It makes a regular wrap with a 1.000" terminal hole depth and a .075" terminal hole diameter, and is for use with (Large) 0.045" square pins. Use with the 122T580 P194LN wire wrap sleeve which must be purchased separately.
122T400 KB18 Wire Wrap BIT, 18-AWG, 3", Standard Wrap
Price: $ 73.00 Each.
 The 122T580 P194LN 18-AWG Wire Wrap Sleeve works with any make or model wire wrap tool.
This easy-to-use sleeve fits OK Industries' Model 122T400 KB18 3" wire wrap bit.
122T580 P194LN Wire Wrapping Sleeve, 18-AWG, 3"
Price: $ 50.50 Each.
 OK Industries' 122T460 KB2075 Standard 3" bit is for regular wraps in 20-22 AWG wire and has a terminal hole depth of 1" and a .075" terminal hole diameter. Use with 122T598 P2224 Sleeve, which must be purchased separately.
122T460 KB2075 Wire Wrap BIT, 20/22-AWG, 3", Standard Wrap
Price: $ 50.50 Each.
 The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models 122T460 KB2075, KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries' 122T404 KB22 Wire Wrap Bit is for regular standard wire wraps with 22 AWG wire, has a terminal hole depth of .750", a .075" terminal hole diameter and is for use with 0.045" (Large) square pins. Use with 122T598 P2224 wire wrap sleeve, which must be purchased separately.
122T404 KB22 Wire Wrap BIT, 22-AWG, 3", Standard Wrap
Price: $ 47.50 Each.
The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models KB2075, 122T404 KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries' 122T430 KB224LH (Large Hole) Standard 3" bit is for regular wraps in 22-24 AWG wire and has a terminal hole depth of 1.00" and a .086" terminal hole diameter. Intende for use with Large Terminals with a minimum Terminal Hole Diameter of .061" and a Maximum Terminal Diameter of .085" with an effective Radius of .117". Use with 122T598 P2224 Sleeve, which must be purchased separately.
122T430 KB224LH (Large Hole) Standard Wrap 3" Bit
Price: $ 45.50 Each.
The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models KB2075, 122T404 KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries' 122T424 KB224 standard 3" wire wrap bit is for regular standard wire wraps with 22-24 AWG wire and has a terminal hols depth of 1.000" and a .075" terminal hole diameter for use with 0.045" (Large) square terminal pins. Use with 122T598 P2224 wire wrap sleeve, which must be purchased separately.
122T424 KB224 Wire Wrap Bit, 22 & 24-AWG, 3" Long, Standard Wrap
Price: $ 37.00 Each.
The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models KB2075, 122T404 KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries 122T888 WB224M Bit works with 22/24-AWG modified wires and has a maximum insulation diameter of .050", a terminal hole depth of 1.250" and a terminal hole diameter of .075". Use with 122T598 P2224 Sleeve which must be purchased separately. Ok Industries wire wrap bits and sleeves may be used with any major brand of wire wrap tools.
122T888 WB224M Wire Wrap Bit, 22 & 24-AWG, Modified Wrap, 3"
Price: $ 50.50 Each.
The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models KB2075, 122T404 KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries' 122T410 KB24 Standard Wrap 3" Bit is for regular standard wire wrapping of 24 AWG wire,
has a terminal hole depth of .750", a .075" terminal hole diameter and is for use with 0.045" (Large) square posts. Use with 122T600 P2426 sleeve, which must be purchased separately.
122T410 KB24 Wire Wrap BIT, 24-AWG, 3", Standard Wrap
Price: $ 47.50 Each.
The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models KB2075, 122T404 KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries' 122T858 WB24SM Wire Wrap Bit for 30-gauge wire with .027" max insulation diameter,
.750" terminal hole depth and .036" terminal hole diameter. Bit is used for modified wrap.
Use with 122t620 P3032LN Wrap Sleeve which must be purchased separately.
122T858 WB24SM Wire Wrap Bit, 24-AWG, Modified Wrap, 3"
Price: $ 50.50 Each.
 The 122T600 P2426 Standard 24 AWG Wire Wrap Sleeve works with any standard make or model wire wrap tool. Designed to work with OK Industries' Models KB26, WB2870M and WB2669M
122T600 P2426 Wire Wrapping Sleeve, 24-AWG, 3"
Price: $ 20.75 Each.
 OK Industries 122T895 WB2426M Bit works with 24/26-AWG modified wraps and has a maximum insulation
diameter of .046", a terminal hole depth of .750" and a terminal hole diameter of .075". Use with 122T598 P2224 Sleeve which must be purchased separately. Ok Industries wire wrap bits and sleeves may be used with any major brand of wire wrap tools.
122T895 WB2426M Wire Wrap Bit, 24 & 26-AWG, Modified Wrap, 3"
Price: $ 50.50 Each.
The 122T598 P2224 standard 22-24 AWG wire wrap sleeve works with any make or model wire wrap tool.
Designed to work with OK Industries' Models KB2075, 122T404 KB22, KB224, WB224M and WB2426M wire wrap bits.
122T598 P2224 Wire Wrapping Sleeve, 20-24 AWG, 3" Long
Price: $ 20.75 Each.
 OK Industries' 122T417 KB26 Standard 3" Bit is for regular standard wire wraps with 26 AWG wire, has a terminal hole depth of 1", a .075" terminal hole diameter and is for use with .045" square pins.
Use with 122T600 P2426 Sleeve, which must be purchased separately.
122T417 KB26 Wire Wrap BIT, 26-AWG, 3", Standard Wrap
Price: $ 47.50 Each.
The 122T600 P2426 Standard 24 AWG Wire Wrap Sleeve works with any standard make or model wire wrap tool.Designed to work with OK Industries' Models KB26, WB2870M and WB2669M
122T600 P2426 Wire Wrapping Sleeve, 24-AWG, 3"
Price: $ 20.75 Each.
 OK Industries' WB26SM (Small Hole) Modified 3" bit is for Modified wraps in 26 AWG wire and has a terminal hole depth of .750" and a .040" terminal hole diameter. Intended for use with Maximum Insulation Diameter of .031", Small Terminals with a minimum Terminal Hole Diameter of .023" and a Maximum Terminal Diameter of .038" with an effective Radius of .075".
Use with P26LN Sleeve, which must be purchased separately.
122T862 WB26SM (Small Pins) Modified Wrap 3" bit
Price: $ 48.00 Each.
 OK Industries' 122T607 P26LN 3" Wire Wrap Sleeve is used with the 122T862 WB26SM for Modified wraps
in 26 AWG wire on Small Diameter Terminals Use with 122T862 WB26SM Wire Wrap BIt, which must be purchased separately.
122T607 P26LN Wire Wrap Sleeve, 3", 26-AWG
Price: $ 35.50 Each.
 OK Industries 122T900 WB2644M Bit works with 26-AWG modified wires and has a maximum insulation
diameter of .046", a terminal hole depth of .750" and a terminal hole diameter of .044". Use with 122T620 P3032LN Sleeve which must be
purchased serparately.
122T900 WB2644M Wire Wrap Bit, 26-AWG, Modified Wrap, 3"
Price: $ 50.50 Each.
 The 122T620 P3032LN 24-26 AWG Wire Wrap Sleeve works with any standard make or model wire wrap tool. Designed to work with OK Industries' Models WB24SM and WB2644M.
122T620 P3032LN Wire Wrapping Sleeve, 24 & 26-AWG, 3"
Price: $ 45.00 Each.
 OK Industries' SB30MSH-B Wire Wrap Bit for 30-gauge wire with .027" max insulation diameter, .750" terminal hole depth and .036" terminal hole diameter. Bit and sleeve have a modified wrap.
Use with P3032INS Insulated Wrap Sleeve which must be purchased separately.
122T670 SB30MSH-B Wire Wrap Bit, 30-AWG, 3", Modified Wrap
Price: $ 56.00 Each.
 Three inch 30-32 AWG wire wrap sleeve is compatible with any make or model wire wrapping tool and fits
OK Industries' Model KB3032 and SB30MSH-B bit.
122T615 P3032INS Wire Wrapping Sleeve, 30 & 32-AWG, 3", Insulated
Price: $ 49.50 Each.
Helpful Wire Wrap Information:
When used in conjunction with an insulated wiring wrapping tool, the bit and sleeve help
protect the worker while minimizing the possibility of pin-to-pin shorting. They're coated
with a non-conductive material that provides 1000-volt dielectric strength.
Make connections to terminals in high-density electronic equipment quickly, reliably and inexpensively.
 Ok Industries' Wrap/Strip/Unwrap Tool offers versatility, convenience, and reliability for bench or tool kit use in all service and repair applications. The portable tool wraps, unwraps and strips the appropriate wire diameter with a built-in blade. WSU-24M is for modified wrapping with 24-AWG (.50 mm) wire on .045" (1.14 mm) square and .03" x .60" rectangular posts. It has .075"
(1.90 mm) terminal hole diameter, 1.50" (38.1 mm) terminal hole depth and 2.13" (5.4) outside diameter.
122T928 WSU-24M Wrap - Strip - Unwrap Tool, 24 AWG, Modified Wrap
Price: $ 43.50 Each.
 OK Industries' Wrap/Strip/Unwrap Tool offers convenience, reliability and exceptional value for bench or tool kit use in all service and repair applications. Portable tool wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripping blade. WSU-2224 works on 22-24 AWG (.65 to .50 mm) wires, has a terminal hole diameter of .075" (1.90 mm), a terminal hole depth of 1.50" (38.1 mm) and an outside diameter of .213" (5.4 mm).
122T927 WSU-2224 Wrap - Strip - Unwrap Tool, 22-24 AWG, Standard Wrap
Price: $ 40.00 Each.
 OK Industries' Wrap/Strip/Unwrap Tool offers convenience, versatility and exceptional value for bench or tool kit use in all service and repair applications. Portable tool wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripping blade. WSU-26M works on modified 26-AWG/ .40 mm wires, has a terminal hole diameter of .075" (1.90 mm), a terminal hole depth of 1.50" (38.1 mm) and an outside diameter of .213" (5.4 mm).
122T930 WSU-26M Wrap - Strip - Unwrap Tool, 26-AWG, Modified Wrap
Price: $ 43.50 Each.
 Model WSU-30 offers versatility, convenience, reliability and exceptional value for bench or tool kit use in all service and repair applications. Portable tool wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripping blade.
122T920 WSU-30 Wrap - Strip - Unwrap Tool, 30-AWG, Standard Wrap
Price: $ 30.00 Each.
 OK Industries' Wrap/Strip/Unwrap tool offers versatility, convenience, reliability and exceptional value for bench or tool kit use in all service and repair applications. Portable tool wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripping blade. WSU-30M works on modified 30 AWG (.25 mm wires), has a terminal hole diameter of .036" (.91 mm), a terminal hole depth of 1.50" (38.1 mm) and an outside diameter of .125" (3.18 mm).
122T925 WSU-30M Wrap - Strip - Unwrap Tool, 30-AWG, Modified Wrap
Price: $ 30.00 Each.
 Quick and convenient to use, this unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds -- a quick change of the cap from one end to the other. OK Industries' HW-UW-20 designed for regular 20 AWG wires. Wrapping terminal hole diameter is .075", side terminal hole depth is 1". Unwrapping terminal outside diameter is .218", side terminal hole is .070", hole depth is 1" and outside diameter is .156".
122T315 HW-UW-20 Wire Wrap-Unwrap Tool, 20 AWG, Standard Wrap
Price: $ 78.00 Each.
 Quick and convenient to use, this unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds -- a quick change of the cap from one end to the other. HW-UW-224 for regular 22-24 AWG wires. Wrapping terminal hole diameter is .075", side terminal hole depth is .807". Unwrapping terminal outside diameter is .218", side terminal hole is .070", hole depth is 1" and outside diameter is .156".
122T345 HW-UW-224 Wire Wrap-Unwrap Tool, 22 & 24 AWG, Standard Wrap
Price: $ 63.00 Each.
 Quick and convenient to use, this unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds, a quick change of the cap from one end to the other. OK Industries' HW-UW-2426 for standard wrapping regular 24-26 AWG wires. Wrapping terminal hole diameter is .075", side terminal hole depth is .750". Unwrapping terminal outside diameter is .218", side terminal hole is .070", hole depth is 1" and outside diameter is .156".
122T360 HW-UW-2426 Wire Wrap-Unwrap Tool, 24 & 26 AWG, Standard Wrap
Price: $ 78.00 Each.
 Quick and convenient to use, each unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds -- a fast change of the cap from one end to the other. OK Industries' HW-UW-26 Reversible Wrap-Unwrap Tool has a regular wrap for 26-AWG wire. Wrap side has .075" terminal hole diameter and 1.000" terminal hole depth. Unwrap side has .218" terminal outside diameter and .070" diameter.
122T330 HW-UW-26 Wire Wrap-Unwrap Tool, 26 AWG, Standard Wrap
Price: $ 78.00 Each.
 Quick and convenient to use, this unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds -- a quick change of the cap from one end to the other. OK Industries' HW-UW-26SM Reversible Wrap-Unwrap Tool has a modified wrap for 26-AWG wire. Wrap side has .040" terminal hole diameter and .750" terminal hole depth. Unwrap side has .125" terminal outside diameter and .038" diameter.
122T321 HW-UW-26SM Hand Wrap-Unwrap Tool, 26 AWG, Modified Wrap
Price: $ 90.00 Each.
 Quick and convenient to use, this unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds -- a quick change of the cap from one end to the other. OK Industries' HW-UW-2829M for modified 28-29 AWG wires. Wrapping terminal hole diameter is .040", side terminal hole depth is .750". Unwrapping terminal outside diameter is .156", side terminal hole is .038", hole depth is 1" and outside diameter is .093".
122T370 HW-UW2829M Wire Wrap-Unwrap Tool, 28 & 29 AWG, Modified Wrap
Price: $ 90.00 Each.
 Quick and convenient to use, this unique tool does the job of two. Switching from wire wrapping to unwrapping takes only seconds -- a quick change of the cap from one end to the other. HW-UW-30 Works on modified 30 AWG wires. Wrapping terminal hole diameter is .036", side terminal hole depth is .750". Unwrapping terminal outside diameter is .125", side terminal hole is .038", hole depth is 1" and outside diameter is .093".
122T336 HW-UW-30 Wire Wrap-Unwrap Tool, 30 AWG, Modified Wrap
Price: $ 90.00 Each.
 OK' Industries' HW-20 Hand Wrapping Tool with a regular wrap and Type A handle on 20-AWG wire for perfect wire-wrapped connections. It has .075" terminal hole diameter, 1.000" terminal hole depth and .218" outside diameter.
122T165 HW-20 Wire Wrapping Tool, 20 AWG, Standard Wrap
Price: $ 64.50 Each.
 OK Industries' HW-224 Hand wrap tool is designed for regular A-type 22-24 AWG wires.
Terminal hole diameter is .075", terminal hole depth is .807" and outside diameter is .218".
122T250 HW-224 Wire Wrapping Tool, 22 & 24 AWG, Standard Wrap
Price: $ 49.00 Each.
 OK Industries' HW-30 30-AWG Manual Wire Wrap Tool with a modified wrap and silver metal handle.
Intended to be used with wrapping 30-AWG wire on 0.025 In Square terminal Posts. Specifications: .027" max insulation diameter,
.036" terminal hole diameter, .750" terminal hole depth and 0.125" outside diameter. Length is 5-5/8 inches.
122T230 HW-30 Wire Wrapping Tool, 30 AWG, Modified Wrap
Price: $ 60.00 Each.
 OK Industries' UW-4 B-type unwrapping tool works on 20-26 AWG wires with a left-hand unwrap. Terminal hole diameter is .070", terminal hole depth is 2.36" and the outside diameter is .187". The convenient YELLOW handle is comfortable and easy to grip with either hand and easy to locate in the tool box or on the job.
122T725 UW-4 Hand Unwrapping Tool, 20-26 AWG, Left Hand
Price: $ 34.50 Each.
 OK Industries UW-5 Unwrapping Tool to remove solderless wrapped connections easily from 20- through
26-gauge wire. This B-type, left- and right-hand unwrap tool has a terminal hole diameter of .070", terminal hole depth of 2.360" and a .187"
outside diameter. The convenient YELLOW handle is comfortable and easy to grip with either hand and easy to locate in the tool box or on the job.
122T730 UW-5 Hand Unwrapping Tool, 20-26 AWG, Left and Right Hand
Price: $ 34.50 Each.
 Ok Industries' UW-1 D-Type unwrapping tool works on 20-26 AWG wires with a left-hand unwrap.
Terminal hole diameter is .070", terminal hole depth is one inch, and the outside diameter is .156".
054T725 UW-1 Hand Unwrapping Tool, 20-26 AWG, LH
Price: $ 27.00 Each.
 OK Industries' UW-2 C-type unwrapping tool works on 20-26 AWG wires with a left- or right-hand unwrap.
Terminal hole diameter is .070", terminal hole depth is 1" and the outside
diameter is .156".
122T720 UW-2 Hand Unwrapping Tool, 20-26 AWG, Left and Right Hand
Price: $ 30.00 Each.
 OK Industries' UWD93-93 C-type unwrapping tool works on 24-32 AWG wires with a left- or right-hand unwrap. Terminal hole diameter is .038", terminal hole depth is 1" and the outside diameter is .093".
122T775 UWD93-93 Hand Unwrapping Tool, 24-32 AWG, Left and Right Hand
Price: $ 27.00 Each.
 Ok Industries' UW-093R D-Type unwrapping tool works on 24-32 AWG wires with a left-hand unwrap.
Terminal hole diameter is .038", terminal hole depth is one inch, and the outside diameter is .093".
054T720 UW-093R Hand Unwrapping Tool, 24-32 AWG, LH
Price: $ 27.00 Each.
 OK Industries' UW-2832C B-type unwrapping tool works on 28-32 AWG wires with a left- or right-hand unwrap. Terminal hole diameter is .038", terminal hole depth is .750" and the outside diameter is .156".
122T770 UW-2832C Hand Unwrapping Tool, 28-32 AWG, Left and Right Hand
Price: $ 48.00 Each.
Copyright Travlynpeddlers.com 2010
All rights reserved, Prices Subject to Change Without Notice
1aCabletools@gmail.com (214) 801-8310
Copyright 1aCabletools.com 2010
All rights reserved, Prices Subject to Change Without Notice
1aCabletools@gmail.com (214) 801-8310
 |
